Tag Archive for: Electrostatic dust collector

Dust extractor FAQs: Does the extractor remove smoke or odours from the interior?

The smoke that is visible to the eye consists mainly of soot particles of various sizes.As the electrostatic precipitator reduces the particles, the visible ‘plume’ is also reduced.What remains is a higher proportion of water vapour, which is perceived as white smoke. The electrostatic precipitator alone does not eliminate odours in the cabin. But it […]

Dust extractor FAQs: Does the extractor remove the smell?

Romantic for some, annoying for others – the smell of a wood fire is perceived differently. Unpleasant odours are usually caused by incorrect operation or the burning of unsuitable fuel. However, even when used correctly, a typical ‘fireplace smell’ can be detected in the surrounding area. This is partly due to what are known as […]

Dust Collector FAQs:What does the electrostatic precipitator filter out of the flue gas?

When wood is burned, flue gas is produced.This process is physically determined and can only be influenced to a limited extent.An electrostatic precipitator can filter the most harmful solids from the flue gas.The burning of natural wood (untreated, unprocessed) produces dust consisting of minerals, soot and tars.An efficient fireplace that meets modern standards can reduce […]

Dust Collector FAQs:How effective are passive filters at filtering particulate matter?

Dust collectors are usually passive filters such as yarns, membranes, foam ceramics or other fabrics.They retain the dust in the exhaust gas and trap it in the filter.This is why these filters, like catalytic converters, need to be replaced or cleaned regularly.In some cases, it is necessary to install a fan, as the filters can […]

Dust Collector FAQs: How effective are catalytic converters at filtering particulate matter?

Catalytic converters reduce, among other things, the so-called organic particles that make up soot and tar. They contribute to the formation of less fine dust, but retain fewer particles than electrostatic precipitators. Their main task is therefore not to remove particles from the exhaust gas, but to remove other toxic substances. As a side effect, […]

Dust Collector FAQs: Are there dust collectors that do not work on the electrostatic principle?

Yes, in addition to electrostatic dust collectors, catalytic and filter dust collectors are also common. Catalysts and filter separators reduce the diameter of the chimney or reduce the chimney draught due to their design. Electrostatic precipitators reduce the chimney diameter, albeit slightly, and have very little effect on draught conditions.

Dust Collector FAQs: Are there other names for electrostatic dust separators?

Yes, they are also known as electrostatic precipitators, electrostatic filters, electrostatics or particle separators. There are also devices that are simply called dust collectors. It is important to check whether they actually work with an electrostatic field or whether they are so-called passive filters.

Dust Collector FAQs: What does collection efficiency tell us about the performance of a dust collector?

The performance of different technologies can be compared using what is known as collection efficiency. Separation efficiency can be measured in two ways. Either you weigh the particles retained by the collector, or you count them.Both methods have their advantages and disadvantages. Weighing is currently (2024) the most commonly used method for regulatory approval or […]